Installing your boat graphics using the hinge method

We ship your boat lettering and graphics in a box or tube. Follow these simple vinyl application instructions.  We can arrange for an expert installer in your area to finish the project for a fee. 

Boat graphics install – The Hinge Method

There are plenty of excellent videos on youtube to demonstrate the proper installation of your boat graphics. We advise on this based on the type of material we use on your boat. Here’s the “Hinge Method” of boat lettering at (t = 350 secs or 5:51). The hinge method is great when you can cut between letters, then you can do them in small sections and follow a curve for example.

https://youtu.be/NTBnMG3rzdk?t=351

Most people are doing this themselves.  Each installation has its own challenges and we can talk about that. Generally, a simple vinyl boat name would be installed using the “Butterfly Method” as follows. Here’s a link to that video – https://marinegraphics.com/installing-your-boat-graphic-the-butterfly-method/

vinyl application instructions
The Butterfly Method for applying boat lettering is often the simplest.

How to remove your old vinyl boat name
Installing smaller graphics is even simpler.
Order an application kit now.

Leave a Reply

Your email address will not be published. Required fields are marked *